Brake & Clutch Tools

Automotive

product_type

tool_material

brand

categoryId

stockStatus

Automotive Tools

Service Tools

Kennedy

Maximum vacuum: 550mm Hg.
Reservoir capacity: 150ml.

Contents: serviceable metal bodied vacuum pump, reservoir jar, transfer lid, storage lid, 4x lengths of 6mm ID tubing, 1x length of 4mm ID tubing adaptor. Set of brake bleeding adaptors, rubber cup adaptor. Dimensions (W x H x D): 350 x 305 x 80mm. Gross weight: 1.5kg.

Vacuum testing kit that helps to locate and identify faults on cars, motorcycles and commercial vehicles. Supplied in robust blow moulded case. 
Contents: serviceable metal bodied vacuum pump, reservoir jar, transfer lid, storage lid, 4x lengths of 6mm ID tubing, 1x length of 4mm ID tubing adaptor. Set of brake bleeding adaptors, rubber cup adaptor.
Maximum vacuum: 550mm Hg.
Reservoir capacity: 150ml.

Vacuum Testing & Brake Bleeding Kit

VACUUM TESTING & BRAKE BLEEDING KIT

FEBK10
Pneumatic fluid extractor for use in draining engine oil, water, fuel and hydraulic fluids from vehicle engines and other mechanical equipment, bleeding brake/clutch fluid and collection of other non-corrosive fluid spillage. High capacity 10ltr fluid reservoir ideal for garage, extension tube storage, used for workshop and on-site use. Supplied with 1500 x 15mm initial tubing with extension tubes; 700 x 6mm, 360 x 10mm, 310 x 6mm and 380mm brake bleeder attachment. Air supply 70-110psi (5-8bar), air consumption 180ltr/min, vacuum (maximum) 500mm HG, extraction rate 2.5ltr/min., air inlet size 1/4” BSP.

Pneumatic Fluid Extractor

PNEUMATIC FLUID EXTRACTOR 10LTR

This ingenious tool is invaluable in the garage workshop for testing the quality of brake fluid. Testing for moisture content in the fluid by resistance to electric current. You get instant results from the built-in LED indicator light system. (Runs on 1 x 1.5V AAA battery).

Brake Fluid Tester (Battery Operated) 

BRAKE FLUID TESTER AAA 1.5V

Winds back disc brake calipers when replacing brake pads. Professional quality, allows the easy return of brake piston into the caliper. Suitable for most braking systems.

Winds back disc brake calipers when replacing brake pads. Professional quality, allows the easy return of brake piston into the caliper. Suitable for most braking systems. Includes left and right handed thrust bolt assemblies, reaction plate and adaptors. Both kits supplied in carry cases.

Universal Caliper Wind-Back Tool Kits

BRAKE PISTON WIND BACK KIT UNIVERSAL 18-PCE

Retracting brake caliper pistons can be used with ½” square drive ratchet and 21mm hex wrench or spanner and is suitable for use on most cars and motorcycles. Constructed from hardened steel with phosphate finished spreader plates for corrosion protection.

Brake Caliper Spreader

DISC BRAKE SPREADER

Ingenious tool for depressing and holding down the brake pedal whilst carrying out maintenance.

Brake Pedal Depressor

BRAKE PEDAL DEPRESSOR

PBB100
Single man operated pneumatic bleeder which simplifies the bleeding of hydraulic fluid in vehicle clutches and brake systems, also used for the collection of other non-corrosive fluid spillage. Has a 1 litre container with a ¼” NPT connection, operates from 90 - 145psi (6 - 10bar) air pressure with an air consumption rate of 180ltr/min, an extraction rate of 1.6Ltr/min and vacuum (max) of  550mm HG. Handles non-flammable liquids between 0 and 80°C.

Pneumatic Brake & Clutch Bleeder

1LTR BRAKE BLEEDER & FLUID EXTRACTOR

BRAKE PISTON WIND BACK KIT RIGHT HAND 12-PCE

8mm hexagon key. 140mm handle for optimum leverage and grip. Suitable for disc brake caliper retaining bolts on many modern cars. Manufactured from chrome vanadium steel with corrosion resistant phosphated finish.

Brake Pad Key

BRAKE PAD KEY

Removes and replaces T-slot anti-rattle spring washers found in drum brake assemblies. Hardened and tempered carbon steel shank and cup with oxidised finish for protection against corrosion, bevelled and notched cup fits 16 - 22mm (5/8" - 7/8") diameter. Impact resistant square section handle for secure grip even when greasy. 
Overall length: 152mm (6").

This brake spring washer tool removes and replaces T-slot anti-rattle spring washers found in drum brake assemblies. Easy to handle and reliable, this tool provides consistent results throughout its long lifespan. 

Features and Benefits
• Hardened and tempered carbon steel shank and cup with oxidised finish for protection against corrosion
• Versatile bevelled and notched cup fits 16 - 22mm (5/8" - 7/8") diameter
• Impact resistant square section handle for secure grip - even when greasy

Notes
• Overall length: 152mm (6")

Brake & Clutch Tools

Kennedy

VACUUM TESTING & BRAKE BLEEDING KIT

Kennedy

PNEUMATIC FLUID EXTRACTOR 10LTR

Kennedy

BRAKE FLUID TESTER AAA 1.5V

Kennedy

BRAKE PISTON WIND BACK KIT UNIVERSAL 18-PCE

2 Variations

Kennedy

DISC BRAKE SPREADER

Kennedy

BRAKE PEDAL DEPRESSOR

Kennedy

1LTR BRAKE BLEEDER & FLUID EXTRACTOR

Kennedy

BRAKE PISTON WIND BACK KIT RIGHT HAND 12-PCE

2 Variations

Kennedy

BRAKE PAD KEY

Kennedy

BRAKE SPRING WASHER TOOL

Key Information

Group Policies

© 2024 Cromwell. All rights reserved.